TL;DR: NVIDIA is transitioning from its Blackwell to Rubin GPU architecture by updating Linux drivers from Boot0 to Boot42, simplifying GPU detection logic. The new open-source Nova driver, partly ...

The anticipation around NVIDIA’s next generation of GPUs is growing as new developments unfold. Recent patches reveal a significant transition in NVIDIA’s technology, hinting at the future direction ...

Bootloader is activated using BOOT pin jumpers on the board. BOOT0=0, BOOT1=1 will activate the bootloader. There is small part of code that is run after each reset that checks this condition. The ...

Kingdom Come: Deliverance 2 presents players with a robust collection of optional content that expands the game’s immersive medieval world beyond the central storyline. These optional objectives are ...

Abstract: In the context of China's sustained and rapid economic development, the layout of intelligent road traffic facilities is increasingly improved, and the automotive industry and related ...

Air32F103 is yet another clone of the STM32F103 microcontroller that can be faster if needed with a clock of up to 216 MHz instead of 72 MHz for the original STMicro STM32 Arm Cortex-M3 ...

Geehy APM32F103 is a clone of STMicro STM32F103 MCU that has been tested by at least one person who claims it was just a drop-in replacement and PCB, code, hex, testing, and production did not have to ...

STM32F103 / STM32F407 boards BOOT0 pin should have jumper (or button) to VDD 3v3, and the pin should be resistor to GND. 1k, 4.7k etc. or can jumper both sides 3V3, BOOT0, GND, so normal use jumper ...

In the first installment of this series we had a brief look at the steps needed to get a bare-metal application running on an STM32 microcontroller. While this allowed us to quickly get to the juicy ...

Whenever a product becomes popular, it’s only a matter of time before other companies start feeling the urge to hitch a ride on this popularity. This phenomenon is the primary reason why so many ...