The technique of tagging the native VLAN we are talking about applies to layer-2 VLANs that are supposed to be separated from each other logically, without layer-3 connectivity, but yet these ...

VLAN tags for Ethernet networks follow the IEEE 802.1Q industry standard. An 802.1Q tag consists of 32 bits (4 bytes) of data inserted into the Ethernet frame header.

In this article, I give a brief overview of 802.1Q VLAN technology and configurations and then explain how you can configure Linux to interface directly with VLAN topologies. I describe how a VLAN ...

Hi. I can't make heads or tails on how to configure several VLANs to the same interface on OSX (Leopard). ifconfig won't use the eth0.11 virtual interfaces of Linux, if I'm not mistaken.System ...

By examining the outer-most virtual LAN (VLAN) tag, multiprotocol label switching (MPLS) label, Internet Protocol (IP) type-of-service byte, DiffServ code point or Ether-net source address (or ...

The whole network works fine if I use it as a dumb switch. All the ports in the house work just fine on the 10.0.1.0/24 network. I made a new VLAN on the switch with a few of the ports.

VLANs provide a number of benefits to a network designer. The first advantage is the number of devices required to implement a given network topology can be reduced. Without VLANs, if your network ...

The versatile DLM205 and DLC205 modules aggregate up to nine channels of 10/100/1000 Ethernet traffic for transporting across electrical or optical networks. Additionally, up to nine VLANs can be ...