Here's a detailed video showing you how to make polyurethane engine and transmission mounts from liquid polyurethane with a detailed procedure, from removing the old mount inserts, burning out the ...

I purchased a 1997 Dodge 2500 with a P Pump Cummins engine. I am planning on building this motor and putting it in my 1997 ...

Once one or more of the mounts fail, the engine is allowed more freedom to move about, placing undue stress on the transmission case at its mounting point. The best case is the transmission mount also ...

If you've been a longtime reader of Classic Trucks, you might remember my F-1 project that I've been working on for the last handful of years. It's been sidelined a few times, but I've finally ...

If your car has over 100,000 miles on it and you’ve never touched the engine or transmission mounts, you should seriously consider changing them. These unique pieces of hardware live hard lives and ...

With the cab and mounts dealt with, next on the list was fitting the donor engine and transmission, which proved to be more than just a simple bolt-in operation. Our LUV came originally equipped with ...

Building a hot rod means working all the angles, and there are plenty of angles to work. One of the more important angles is the angle between your transmission output shaft (which is the same as the ...